BIGTREETECH 3D Printer Accessories Collapsible Funnel Silicone, with Stainless Steel Resin Filter Cup, for SLA DLP and LCD 3D Printer Parts
SKU: AMC5F7F802A2F- 1. 3D Printer Stainless Steel Funnel and Silicone Collapsible fileter cup for Resin used with SLA DLP and LCD 3D printer.
- 2. Stainless Steel Funnel is made of quality stainless steel, durable, wide-mouth design ensures smooth, splash-less operation.
- 3. Silicone Collapsible Funnel is made of quality silicone, soft, flexible, non toxic. Good match.
BIGTREETECH FEP Flim Sheet Transparent, 140 * 200mm 0.15-0.2mm Thickness (5-Pack) for LCD SLA Resin UV DLP 3D Printer Accessories
SKU: AMC5F7F7E8EDF- 1. 95% light transmission ensures a high stability of the UV lighting.
- 2. 200 x 140 mm size for 5pc film with a thickness of 0.15 mm to 0.2 mm.
- 3. Smooth surface quality and longer life. A higher UV permeability makes your printing work more polished and beautiful.
BIGTREETECH SKR 2 Controller Board for 3D Printer New Upgrade Silent Board Based on SKR V1.4 Turbo Motherboard for BIQU B1 Compitable TMC2209/2208, DRV8825 Support TFT Display, LCD, (with 5pcs TMC2209)
SKU: AMC5F68E8299A- TMC2209–The motor is not easy to lose step; ultra-quiet mode;
- TMC2209–A large area of thermal pad, reduce the temperature of the driving work;
- TMC2209–Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode
BIGTREETECH TFT35 E3 V3.0 Graphic Smart Display Control Board for Creality Ender 3 Compatible SKR Mini E3 V2.0, V1.2, SKR V1.4 Turbo, SKR V1.4, SKR V1.3, SKR Pro V1.2, etc.
SKU: AMC2423765936- 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 2)This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 3)Reserve WIFI port, and WIFI function is realized by external WIFI module;Reserve the extension port of filament breaking detection (FIL-DET);
KIINGPRINT Ultra-Flexible Removable Surface Heated Bed Platform, with Magnetic Sticker 310x310mm 3D Printer Parts Printing Build Plate r CR10 CR10S Pro
SKU: AMC5F68E85B05- Suitable for CR10/CR10S Pro Series 3D Printer Original Removable Build Surface Platform.
- Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board.
UV Resin Curing Light with Solar Turntable 360?Rotating Stand for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosue for UV Photocuring 3D Printer
SKU: AMC00561837- Package includes: curing lamp, turntable, charger converter(Three products)
- The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.
- The 360°rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can’t use batteries for power.Maximum display/rotate weighing less than 500g/1.1Pound. Close to light will help to speed up and rotate heavier.
BIGTREETECH 3D Printer Accessories Collapsible Funnel Silicone, with Stainless Steel Resin Filter Cup, for SLA DLP and LCD 3D Printer Parts
- 1. 3D Printer Stainless Steel Funnel and Silicone Collapsible fileter cup for Resin used with SLA DLP and LCD 3D printer.
- 2. Stainless Steel Funnel is made of quality stainless steel, durable, wide-mouth design ensures smooth, splash-less operation.
- 3. Silicone Collapsible Funnel is made of quality silicone, soft, flexible, non toxic. Good match.
BIGTREETECH FEP Flim Sheet Transparent, 140 * 200mm 0.15-0.2mm Thickness (5-Pack) for LCD SLA Resin UV DLP 3D Printer Accessories
- 1. 95% light transmission ensures a high stability of the UV lighting.
- 2. 200 x 140 mm size for 5pc film with a thickness of 0.15 mm to 0.2 mm.
- 3. Smooth surface quality and longer life. A higher UV permeability makes your printing work more polished and beautiful.
BIGTREETECH SKR 2 Controller Board for 3D Printer New Upgrade Silent Board Based on SKR V1.4 Turbo Motherboard for BIQU B1 Compitable TMC2209/2208, DRV8825 Support TFT Display, LCD, (with 5pcs TMC2209)
- TMC2209–The motor is not easy to lose step; ultra-quiet mode;
- TMC2209–A large area of thermal pad, reduce the temperature of the driving work;
- TMC2209–Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode
BIGTREETECH TFT35 E3 V3.0 Graphic Smart Display Control Board for Creality Ender 3 Compatible SKR Mini E3 V2.0, V1.2, SKR V1.4 Turbo, SKR V1.4, SKR V1.3, SKR Pro V1.2, etc.
- 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 2)This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 3)Reserve WIFI port, and WIFI function is realized by external WIFI module;Reserve the extension port of filament breaking detection (FIL-DET);
KIINGPRINT Ultra-Flexible Removable Surface Heated Bed Platform, with Magnetic Sticker 310x310mm 3D Printer Parts Printing Build Plate r CR10 CR10S Pro
- Suitable for CR10/CR10S Pro Series 3D Printer Original Removable Build Surface Platform.
- Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board.
UV Resin Curing Light with Solar Turntable 360?Rotating Stand for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosue for UV Photocuring 3D Printer
- Package includes: curing lamp, turntable, charger converter(Three products)
- The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.
- The 360°rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can’t use batteries for power.Maximum display/rotate weighing less than 500g/1.1Pound. Close to light will help to speed up and rotate heavier.
BIGTREETECH 3D Printer Accessories Collapsible Funnel Silicone, with Stainless Steel Resin Filter Cup, for SLA DLP and LCD 3D Printer Parts
- 1. 3D Printer Stainless Steel Funnel and Silicone Collapsible fileter cup for Resin used with SLA DLP and LCD 3D printer.
- 2. Stainless Steel Funnel is made of quality stainless steel, durable, wide-mouth design ensures smooth, splash-less operation.
- 3. Silicone Collapsible Funnel is made of quality silicone, soft, flexible, non toxic. Good match.
BIGTREETECH FEP Flim Sheet Transparent, 140 * 200mm 0.15-0.2mm Thickness (5-Pack) for LCD SLA Resin UV DLP 3D Printer Accessories
- 1. 95% light transmission ensures a high stability of the UV lighting.
- 2. 200 x 140 mm size for 5pc film with a thickness of 0.15 mm to 0.2 mm.
- 3. Smooth surface quality and longer life. A higher UV permeability makes your printing work more polished and beautiful.
BIGTREETECH SKR 2 Controller Board for 3D Printer New Upgrade Silent Board Based on SKR V1.4 Turbo Motherboard for BIQU B1 Compitable TMC2209/2208, DRV8825 Support TFT Display, LCD, (with 5pcs TMC2209)
- TMC2209–The motor is not easy to lose step; ultra-quiet mode;
- TMC2209–A large area of thermal pad, reduce the temperature of the driving work;
- TMC2209–Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode
BIGTREETECH TFT35 E3 V3.0 Graphic Smart Display Control Board for Creality Ender 3 Compatible SKR Mini E3 V2.0, V1.2, SKR V1.4 Turbo, SKR V1.4, SKR V1.3, SKR Pro V1.2, etc.
- 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 2)This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 3)Reserve WIFI port, and WIFI function is realized by external WIFI module;Reserve the extension port of filament breaking detection (FIL-DET);
KIINGPRINT Ultra-Flexible Removable Surface Heated Bed Platform, with Magnetic Sticker 310x310mm 3D Printer Parts Printing Build Plate r CR10 CR10S Pro
- Suitable for CR10/CR10S Pro Series 3D Printer Original Removable Build Surface Platform.
- Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board.
UV Resin Curing Light with Solar Turntable 360?Rotating Stand for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosue for UV Photocuring 3D Printer
- Package includes: curing lamp, turntable, charger converter(Three products)
- The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.
- The 360°rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can’t use batteries for power.Maximum display/rotate weighing less than 500g/1.1Pound. Close to light will help to speed up and rotate heavier.
BIGTREETECH 3D Printer Accessories Collapsible Funnel Silicone, with Stainless Steel Resin Filter Cup, for SLA DLP and LCD 3D Printer Parts
- 1. 3D Printer Stainless Steel Funnel and Silicone Collapsible fileter cup for Resin used with SLA DLP and LCD 3D printer.
- 2. Stainless Steel Funnel is made of quality stainless steel, durable, wide-mouth design ensures smooth, splash-less operation.
- 3. Silicone Collapsible Funnel is made of quality silicone, soft, flexible, non toxic. Good match.
$20.99
Add to cart
BIGTREETECH FEP Flim Sheet Transparent, 140 * 200mm 0.15-0.2mm Thickness (5-Pack) for LCD SLA Resin UV DLP 3D Printer Accessories
- 1. 95% light transmission ensures a high stability of the UV lighting.
- 2. 200 x 140 mm size for 5pc film with a thickness of 0.15 mm to 0.2 mm.
- 3. Smooth surface quality and longer life. A higher UV permeability makes your printing work more polished and beautiful.
$41.99
Add to cart
BIGTREETECH SKR 2 Controller Board for 3D Printer New Upgrade Silent Board Based on SKR V1.4 Turbo Motherboard for BIQU B1 Compitable TMC2209/2208, DRV8825 Support TFT Display, LCD, (with 5pcs TMC2209)
- TMC2209–The motor is not easy to lose step; ultra-quiet mode;
- TMC2209–A large area of thermal pad, reduce the temperature of the driving work;
- TMC2209–Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode
$139.99
Add to cart
BIGTREETECH TFT35 E3 V3.0 Graphic Smart Display Control Board for Creality Ender 3 Compatible SKR Mini E3 V2.0, V1.2, SKR V1.4 Turbo, SKR V1.4, SKR V1.3, SKR Pro V1.2, etc.
- 1)ARM Cortex-M3 series STM32F207VCT6 chip with 32-bit CPU 120MHz; Upgrade the firmware by SD card. It is easy and convenient to operate.
- 2)This display board has higher compatibility. Users can select two work modes:UART serial port screen mode and 12864 screen mode;Serial port screen mode supports two printing modes: SD card and U disk.
- 3)Reserve WIFI port, and WIFI function is realized by external WIFI module;Reserve the extension port of filament breaking detection (FIL-DET);
$89.59
Add to cart
KIINGPRINT Ultra-Flexible Removable Surface Heated Bed Platform, with Magnetic Sticker 310x310mm 3D Printer Parts Printing Build Plate r CR10 CR10S Pro
- Suitable for CR10/CR10S Pro Series 3D Printer Original Removable Build Surface Platform.
- Heated bed Platform: Easy to Use and Flexible, which has certain flexibility and can be bent. After cooling, the model is loose and easy to take.
- Magnetic Sticker:The build surface has an upper magnetic build surface and a lower magnetic adhesive base. Place the 3M lower adhesive surface on a common construction board.
$69.99
Add to cart
UV Resin Curing Light with Solar Turntable 360?Rotating Stand for SLA DLP 3D Printer Solidify Photosensitive Resin 405nm UV Resin Affect, DIY Curing Enclosue for UV Photocuring 3D Printer
- Package includes: curing lamp, turntable, charger converter(Three products)
- The UV LED lamp uses 6 high-power 405nm UV LEDs to quickly cure 405nm UV resin prints, allowing objects to be cured efficiently, using less time than usual.
- The 360°rotating solar turntable use power from UV lighting /nature solar Power/fluorescent lighting, can’t use batteries for power.Maximum display/rotate weighing less than 500g/1.1Pound. Close to light will help to speed up and rotate heavier.
$68.59
Add to cart