Creality 3D Ender 3 Glass Heated Bed Build Surface Tempered Glass Plate 235x235x4mm for Ender 3/ Ender 3 Pro/Ender 5
SKU: AMC5F7F7F5635- Compatibility: Length and width is 235 *235mm. It is specially designed for Creality Ender 3/Ender 3 Pro/Ender 5.
- High performance: Silicon carbide glass has stability, a high coefficient of thermal conductivity, good wear resistance and can withstand extreme temperatures.
- Reliability: The special coating is inorganic, with a hardness of 8 Moh and a heat resistance up to 400.
Creality 3D Ender 3 Pro Silent Motherboard Upgrade Mute Mainboard V4.2.7 with TMC2225 Driver for Ender 3/Ender 3 Pro/Ender 5/Ender 3 V2
SKU: AMC91619100345- [COMPATIBILITY] Suitable for Ender 3, just plug it in and start printing. Compatible with Creality Ender 3, Ender 3 Pro, Ender-3S, Ender 5 3D printer.
- [DRIVER] TMC2225 drivers is super quiet. Marlin2.0.1 and Bootloader installed, the firmware can be modified by ARDUNO with USB cable.
- [SAFETY] Support 24V input voltage, thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solve the heating problem.
Creality Ender 3 Fan 4010 24V DC Extruder Hot End Circle Fan and 24V Blower Cooling Fan 40x40x10MM for 3D Printer Parts Ender 3/Ender 3 Pro
SKU: AMC5F7F7F575D- Use For :Creality Ender 3/ Ender 3 Pro /Ender 3X
- Material:Plastic
- Operation Voltage: DC 24V
Creality Upgraded 3D Printer Platform Heated Bed Build Surface Glass Plate 235x235x3mm for Ender 3 Hot Bed
SKU: AMC2404565909- Very easy to take off the models; No tools needed when removing models
- Use clips to fix the glass plate on the hot bed
- Higher temperature higher sticky. The models will stick on bed firmly when temperature is high
Official Creality 3D Ender 3 Pro Upgraded 3D Printer with Removable Magnetic Bed 220 x 220 x 250mm
SKU: AMC3404565910- FAST HEATING And RESUME PRINT: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- PRINTING STABILITY: Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
- REMOVE EASILY: Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
Official Creality 3D Flexible Removable Magnetic Print Surface for CR-10/CR-10S 310X310MM
SKU: AMC5F68E8C501- [ALL NEW FUNCTIONALITY]: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- [EASY MODEL REMOVAL]: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- [CUSTOMIZABLE]: Size 310*310mm,original for CR-10/CR-10S.The flexible surface can easily be cut to any dimensions making it perfect for all build sizes and all FDM printer models.
Creality 3D Ender 3 Glass Heated Bed Build Surface Tempered Glass Plate 235x235x4mm for Ender 3/ Ender 3 Pro/Ender 5
- Compatibility: Length and width is 235 *235mm. It is specially designed for Creality Ender 3/Ender 3 Pro/Ender 5.
- High performance: Silicon carbide glass has stability, a high coefficient of thermal conductivity, good wear resistance and can withstand extreme temperatures.
- Reliability: The special coating is inorganic, with a hardness of 8 Moh and a heat resistance up to 400.
Creality 3D Ender 3 Pro Silent Motherboard Upgrade Mute Mainboard V4.2.7 with TMC2225 Driver for Ender 3/Ender 3 Pro/Ender 5/Ender 3 V2
- [COMPATIBILITY] Suitable for Ender 3, just plug it in and start printing. Compatible with Creality Ender 3, Ender 3 Pro, Ender-3S, Ender 5 3D printer.
- [DRIVER] TMC2225 drivers is super quiet. Marlin2.0.1 and Bootloader installed, the firmware can be modified by ARDUNO with USB cable.
- [SAFETY] Support 24V input voltage, thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solve the heating problem.
Creality Ender 3 Fan 4010 24V DC Extruder Hot End Circle Fan and 24V Blower Cooling Fan 40x40x10MM for 3D Printer Parts Ender 3/Ender 3 Pro
- Use For :Creality Ender 3/ Ender 3 Pro /Ender 3X
- Material:Plastic
- Operation Voltage: DC 24V
Creality Upgraded 3D Printer Platform Heated Bed Build Surface Glass Plate 235x235x3mm for Ender 3 Hot Bed
- Very easy to take off the models; No tools needed when removing models
- Use clips to fix the glass plate on the hot bed
- Higher temperature higher sticky. The models will stick on bed firmly when temperature is high
Official Creality 3D Ender 3 Pro Upgraded 3D Printer with Removable Magnetic Bed 220 x 220 x 250mm
- FAST HEATING And RESUME PRINT: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- PRINTING STABILITY: Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
- REMOVE EASILY: Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
Official Creality 3D Flexible Removable Magnetic Print Surface for CR-10/CR-10S 310X310MM
- [ALL NEW FUNCTIONALITY]: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- [EASY MODEL REMOVAL]: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- [CUSTOMIZABLE]: Size 310*310mm,original for CR-10/CR-10S.The flexible surface can easily be cut to any dimensions making it perfect for all build sizes and all FDM printer models.
Creality 3D Ender 3 Glass Heated Bed Build Surface Tempered Glass Plate 235x235x4mm for Ender 3/ Ender 3 Pro/Ender 5
- Compatibility: Length and width is 235 *235mm. It is specially designed for Creality Ender 3/Ender 3 Pro/Ender 5.
- High performance: Silicon carbide glass has stability, a high coefficient of thermal conductivity, good wear resistance and can withstand extreme temperatures.
- Reliability: The special coating is inorganic, with a hardness of 8 Moh and a heat resistance up to 400.
Creality 3D Ender 3 Pro Silent Motherboard Upgrade Mute Mainboard V4.2.7 with TMC2225 Driver for Ender 3/Ender 3 Pro/Ender 5/Ender 3 V2
- [COMPATIBILITY] Suitable for Ender 3, just plug it in and start printing. Compatible with Creality Ender 3, Ender 3 Pro, Ender-3S, Ender 5 3D printer.
- [DRIVER] TMC2225 drivers is super quiet. Marlin2.0.1 and Bootloader installed, the firmware can be modified by ARDUNO with USB cable.
- [SAFETY] Support 24V input voltage, thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solve the heating problem.
Creality Ender 3 Fan 4010 24V DC Extruder Hot End Circle Fan and 24V Blower Cooling Fan 40x40x10MM for 3D Printer Parts Ender 3/Ender 3 Pro
- Use For :Creality Ender 3/ Ender 3 Pro /Ender 3X
- Material:Plastic
- Operation Voltage: DC 24V
Creality Upgraded 3D Printer Platform Heated Bed Build Surface Glass Plate 235x235x3mm for Ender 3 Hot Bed
- Very easy to take off the models; No tools needed when removing models
- Use clips to fix the glass plate on the hot bed
- Higher temperature higher sticky. The models will stick on bed firmly when temperature is high
Official Creality 3D Ender 3 Pro Upgraded 3D Printer with Removable Magnetic Bed 220 x 220 x 250mm
- FAST HEATING And RESUME PRINT: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- PRINTING STABILITY: Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
- REMOVE EASILY: Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
Official Creality 3D Flexible Removable Magnetic Print Surface for CR-10/CR-10S 310X310MM
- [ALL NEW FUNCTIONALITY]: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- [EASY MODEL REMOVAL]: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- [CUSTOMIZABLE]: Size 310*310mm,original for CR-10/CR-10S.The flexible surface can easily be cut to any dimensions making it perfect for all build sizes and all FDM printer models.
Creality 3D Ender 3 Glass Heated Bed Build Surface Tempered Glass Plate 235x235x4mm for Ender 3/ Ender 3 Pro/Ender 5
- Compatibility: Length and width is 235 *235mm. It is specially designed for Creality Ender 3/Ender 3 Pro/Ender 5.
- High performance: Silicon carbide glass has stability, a high coefficient of thermal conductivity, good wear resistance and can withstand extreme temperatures.
- Reliability: The special coating is inorganic, with a hardness of 8 Moh and a heat resistance up to 400.
$55.99
Add to cart
Creality 3D Ender 3 Pro Silent Motherboard Upgrade Mute Mainboard V4.2.7 with TMC2225 Driver for Ender 3/Ender 3 Pro/Ender 5/Ender 3 V2
- [COMPATIBILITY] Suitable for Ender 3, just plug it in and start printing. Compatible with Creality Ender 3, Ender 3 Pro, Ender-3S, Ender 5 3D printer.
- [DRIVER] TMC2225 drivers is super quiet. Marlin2.0.1 and Bootloader installed, the firmware can be modified by ARDUNO with USB cable.
- [SAFETY] Support 24V input voltage, thermal runaway protection is enabled, if the temperature rises out of control, the printer will stop heating and halt automatically. The Board is Optimized by Circuit, effectively solve the heating problem.
$97.99
Add to cart
Creality Ender 3 Fan 4010 24V DC Extruder Hot End Circle Fan and 24V Blower Cooling Fan 40x40x10MM for 3D Printer Parts Ender 3/Ender 3 Pro
- Use For :Creality Ender 3/ Ender 3 Pro /Ender 3X
- Material:Plastic
- Operation Voltage: DC 24V
$19.59
Add to cart
Creality Upgraded 3D Printer Platform Heated Bed Build Surface Glass Plate 235x235x3mm for Ender 3 Hot Bed
- Very easy to take off the models; No tools needed when removing models
- Use clips to fix the glass plate on the hot bed
- Higher temperature higher sticky. The models will stick on bed firmly when temperature is high
$33.59
Add to cart
Official Creality 3D Ender 3 Pro Upgraded 3D Printer with Removable Magnetic Bed 220 x 220 x 250mm
- FAST HEATING And RESUME PRINT: The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste.
- PRINTING STABILITY: Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly
- REMOVE EASILY: Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary.
$475.99
Add to cart
Official Creality 3D Flexible Removable Magnetic Print Surface for CR-10/CR-10S 310X310MM
- [ALL NEW FUNCTIONALITY]: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design.
- [EASY MODEL REMOVAL]: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
- [CUSTOMIZABLE]: Size 310*310mm,original for CR-10/CR-10S.The flexible surface can easily be cut to any dimensions making it perfect for all build sizes and all FDM printer models.
$51.79
Add to cart