4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5
SKU: AMC0402965900- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
Comgrow 3D 1.1.5 (4.2.7) Upgrade Mute Silent Mainboard for Ender 3 Pro Customized Silent Board, Ender 3 Pro Silent Mother Board
SKU: AMC5F7F7DC447- Suitable for Ender 3 Pro; Silent function ( Customized and Non-standard matching).
- The TMC2225 driver is super quiet.
- Bootloader installed (ISP/USB).
Creality 3D Ender 5 Plus 3D Printer, with BL Touch, Glass Building Plate and Touch Screen, Dual Z Axis Lead Screw, Large Print Size of 350x350x400mm
SKU: AMC31600709941- BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches
- Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
Creality CR-10 V3 3D Printer New Version with Titan Direct Drive, Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm
SKU: AMC5F7F30F69F- Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.
- Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.
- Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer
SKU: AMC5F7F80BE65- Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro
- Materials: Plastic
- Operation Voltage: DC 24V
Creality Original 3pcs Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for 3D Printer Creality Ender 3 Ender 3X
SKU: AMC8413265918- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards.
- Compatible with ABS, PLA, HIPS and other filament.
Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro 3D Printer 235X235MM
SKU: AMC8393765878- ATTENTION BEFORE USE:Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 220x220x250mm
SKU: AMC5F7F345CE7- Resume Print Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
Official Creality Ender 3 3D Printer with Tempered Glass Plate and Build Volume 220x220x250mm
SKU: AMC6431965948- Ender-3X Version: Add a tempered glass on the heated bed, which makes models are easier removed. It also makes the hot bed more flat.
- Easy and Qucik Assembly: Ender 3X comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheels make it move noiseless, smoothly and durable.
Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Meanwell Power Supply, FDM 3D Printers for DIY Home and School Printing Size 220x220x250mm
SKU: AMC6303665703- REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
Official Creality Ender 3 Pro 3D Printer with Tempered Glass Plate and Five Nozzles Build Volume 220x220x250mm
SKU: AMC0051759- Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
Official Creality Ender-3 V2 3D Printer with Silent Motherboard MeanWell Power Supply Carborundum Glass Platform and Resume Printing Function 220x220x250mm
SKU: AMC8423765934- Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
- Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3″ smart color screen greatly improve user experience.
Upgraded Creality Hand Twist Leveling Nuts, 1M Capricorn XS Bowden Tubing, Tube Cutter, Hot Bed Die Springs and M4X35 Screws for Ender 3/3 Pro, Ender 5/5 Plus, CR-10, CR10S/10S Pro, CR 20 3D Printer
SKU: AMC5F7F7F4AB1- 4*Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
- 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 4* Hot bed Die Spring. NOTE: The springs are around 25mm long, which is longer than ender 3, ender 3 pro and ender 3 v2 printer springs. If you really like this product, you can use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs.
4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
Comgrow 3D 1.1.5 (4.2.7) Upgrade Mute Silent Mainboard for Ender 3 Pro Customized Silent Board, Ender 3 Pro Silent Mother Board
- Suitable for Ender 3 Pro; Silent function ( Customized and Non-standard matching).
- The TMC2225 driver is super quiet.
- Bootloader installed (ISP/USB).
Creality 3D Ender 5 Plus 3D Printer, with BL Touch, Glass Building Plate and Touch Screen, Dual Z Axis Lead Screw, Large Print Size of 350x350x400mm
- BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches
- Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
Creality CR-10 V3 3D Printer New Version with Titan Direct Drive, Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm
- Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.
- Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.
- Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer
- Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro
- Materials: Plastic
- Operation Voltage: DC 24V
Creality Original 3pcs Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for 3D Printer Creality Ender 3 Ender 3X
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards.
- Compatible with ABS, PLA, HIPS and other filament.
Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro 3D Printer 235X235MM
- ATTENTION BEFORE USE:Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 220x220x250mm
- Resume Print Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
Official Creality Ender 3 3D Printer with Tempered Glass Plate and Build Volume 220x220x250mm
- Ender-3X Version: Add a tempered glass on the heated bed, which makes models are easier removed. It also makes the hot bed more flat.
- Easy and Qucik Assembly: Ender 3X comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheels make it move noiseless, smoothly and durable.
Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Meanwell Power Supply, FDM 3D Printers for DIY Home and School Printing Size 220x220x250mm
- REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
Official Creality Ender 3 Pro 3D Printer with Tempered Glass Plate and Five Nozzles Build Volume 220x220x250mm
- Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
Official Creality Ender-3 V2 3D Printer with Silent Motherboard MeanWell Power Supply Carborundum Glass Platform and Resume Printing Function 220x220x250mm
- Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
- Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3″ smart color screen greatly improve user experience.
Upgraded Creality Hand Twist Leveling Nuts, 1M Capricorn XS Bowden Tubing, Tube Cutter, Hot Bed Die Springs and M4X35 Screws for Ender 3/3 Pro, Ender 5/5 Plus, CR-10, CR10S/10S Pro, CR 20 3D Printer
- 4*Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
- 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 4* Hot bed Die Spring. NOTE: The springs are around 25mm long, which is longer than ender 3, ender 3 pro and ender 3 v2 printer springs. If you really like this product, you can use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs.
4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
Comgrow 3D 1.1.5 (4.2.7) Upgrade Mute Silent Mainboard for Ender 3 Pro Customized Silent Board, Ender 3 Pro Silent Mother Board
- Suitable for Ender 3 Pro; Silent function ( Customized and Non-standard matching).
- The TMC2225 driver is super quiet.
- Bootloader installed (ISP/USB).
Creality 3D Ender 5 Plus 3D Printer, with BL Touch, Glass Building Plate and Touch Screen, Dual Z Axis Lead Screw, Large Print Size of 350x350x400mm
- BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches
- Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
Creality CR-10 V3 3D Printer New Version with Titan Direct Drive, Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm
- Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.
- Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.
- Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer
- Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro
- Materials: Plastic
- Operation Voltage: DC 24V
Creality Original 3pcs Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for 3D Printer Creality Ender 3 Ender 3X
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards.
- Compatible with ABS, PLA, HIPS and other filament.
Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro 3D Printer 235X235MM
- ATTENTION BEFORE USE:Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 220x220x250mm
- Resume Print Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
Official Creality Ender 3 3D Printer with Tempered Glass Plate and Build Volume 220x220x250mm
- Ender-3X Version: Add a tempered glass on the heated bed, which makes models are easier removed. It also makes the hot bed more flat.
- Easy and Qucik Assembly: Ender 3X comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheels make it move noiseless, smoothly and durable.
Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Meanwell Power Supply, FDM 3D Printers for DIY Home and School Printing Size 220x220x250mm
- REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
Official Creality Ender 3 Pro 3D Printer with Tempered Glass Plate and Five Nozzles Build Volume 220x220x250mm
- Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
Official Creality Ender-3 V2 3D Printer with Silent Motherboard MeanWell Power Supply Carborundum Glass Platform and Resume Printing Function 220x220x250mm
- Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
- Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3″ smart color screen greatly improve user experience.
Upgraded Creality Hand Twist Leveling Nuts, 1M Capricorn XS Bowden Tubing, Tube Cutter, Hot Bed Die Springs and M4X35 Screws for Ender 3/3 Pro, Ender 5/5 Plus, CR-10, CR10S/10S Pro, CR 20 3D Printer
- 4*Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
- 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 4* Hot bed Die Spring. NOTE: The springs are around 25mm long, which is longer than ender 3, ender 3 pro and ender 3 v2 printer springs. If you really like this product, you can use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs.
4PCS Comgrow Printer Hotend Silicone Sock Heater Block Silicone Cover for Comgrow Ender 3 Ender 3 Pro Ender 5 CR-10 10S S4 S5
- This Comgrow hotend sock will greatly help to stabalize the temperature of the hotend regardless of the surrounding environment temperatures.
- Hotend Socks can be used to quickly heat the hotend to a desired temperature as the structure of the silicone inside the sock prevents heat from escaping quickly.
- This is a great replacement for the easily worn and torn kapton tape and heat resistant cotton that come with any 3D printers. This silicone sock is much more durable and functional when compared to typical stock soloutions for hotend insulation.
$16.79
Add to cart
Comgrow 3D 1.1.5 (4.2.7) Upgrade Mute Silent Mainboard for Ender 3 Pro Customized Silent Board, Ender 3 Pro Silent Mother Board
- Suitable for Ender 3 Pro; Silent function ( Customized and Non-standard matching).
- The TMC2225 driver is super quiet.
- Bootloader installed (ISP/USB).
$83.99
Add to cart
Creality 3D Ender 5 Plus 3D Printer, with BL Touch, Glass Building Plate and Touch Screen, Dual Z Axis Lead Screw, Large Print Size of 350x350x400mm
- BLTouch Auto Bed Leveling Sensor: It can precisely measure the tilt of hot bed surface and offers Z axis leveling compensation. Saving your time and reducing waste.
- Equipped with Two Lead Screws on Z Axis: The hot bed was held stably on Z axis frames, no worry about bed wobbling and dropping, fewer points of failure and fewer headaches
- Dual Y Axis Motors: Y axis dual shaft motor and down-shift Z axis, moving more smoothly, ensure high precision printing.
$996.79
Add to cart
Creality CR-10 V3 3D Printer New Version with Titan Direct Drive, Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm
- Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament directly into the nozzle. Since it minimizes the distance for filament traveling to the hot end, the direct extruder is more helpful and reliable when producing 3D prints with flexible soft filaments like TPU and ABS and can help to avoid filament stringing and oozing during printing.
- Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down immediately, thus reducing jamming and poor-spillage.
- Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm properties as well as reduces noise. 1.1.6 Version firmware, theminal runaway protection and resume printing function are pre-installed in the motherboard.
$861.28
Add to cart
Creality Ender 3 Original 4010 Fans 40x40x10MM DC 24V Extruder Hot End Fan and DC 24V Turbo Fan for Ender 3 3D Printer
- Fit for: Creality Ender 3, Ender 3X, Ender 3 Pro
- Materials: Plastic
- Operation Voltage: DC 24V
$20.99
Add to cart
Creality Original 3pcs Heat Bed Platform Sticker Sheet, Hot Bed Build Surface Tape 235x235mm for 3D Printer Creality Ender 3 Ender 3X
- Size: 235mm x 235mm.
- Build sheet adheres to the hot bed to help the filament sticked during printing, while also help removal of the printed model afterwards.
- Compatible with ABS, PLA, HIPS and other filament.
$33.59
Add to cart
Creality Original Ultra Flexible Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 pro/Ender 3 V2/Ender 5 Pro 3D Printer 235X235MM
- ATTENTION BEFORE USE:Firstly, please make sure the bottom of the soft magnetic sticker and the top layer are firmly adsorbed before installation. If it cannot be adsorbed, please rotate it 90 degrees and try again until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation.
- ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools.
- EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
$33.56
Add to cart
Official Creality Ender 3 3D Printer Fully Open Source with Resume Printing Function DIY 3D Printers Printing Size 220x220x250mm
- Resume Print Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs.
- Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-shape with POM wheels make it move noiseless, smoothly and durable.
$410.20
Add to cart
Official Creality Ender 3 3D Printer with Tempered Glass Plate and Build Volume 220x220x250mm
- Ender-3X Version: Add a tempered glass on the heated bed, which makes models are easier removed. It also makes the hot bed more flat.
- Easy and Qucik Assembly: Ender 3X comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well.
- Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Slot with POM wheels make it move noiseless, smoothly and durable.
$741.99
Add to cart
Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and UL Certified Meanwell Power Supply, FDM 3D Printers for DIY Home and School Printing Size 220x220x250mm
- REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
- SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes.
- RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages.
$474.60
Add to cart
Official Creality Ender 3 Pro 3D Printer with Tempered Glass Plate and Five Nozzles Build Volume 220x220x250mm
- Upgraded Version: It comes with extra glass plate, Cmagnet build surface, and also MeanWell power supply. The Ender 3 Pro boasts the same outstanding performance as the Ender 3, upgraded components make this 3D printer more stable, durable and easier to operate.
- MeanWell Power Supply: Equipped with UL certified MeanWell power supply, which is produced by the listed company with mature technology, and it meets all the needs of fast heating and long-time 3D printing.
- Cmagnet Build Surface Plate: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling.
$743.39
Add to cart
Official Creality Ender-3 V2 3D Printer with Silent Motherboard MeanWell Power Supply Carborundum Glass Platform and Resume Printing Function 220x220x250mm
- Self-developed Silent Motherboard: The Ender-3 V2 built-in self-developed silent motherboard, which has stronger anti-interference, faster and more stable motion performance, silent printing and low decibel operation.
- UL Certified MeanWell Power Supply: Equipped with MeanWell power supply, produced by the listed company with mature technology, meeting all the needs of fast heating and long-time printing. Moreover, the power supply is concealed in the machine, making it much safer.
- Effortless Filament Feed-in: Ender-3 V2 adds a rotary knob on the extruder, making loading and feeding filament process much easier; Brand new operation UI system and 4.3″ smart color screen greatly improve user experience.
$548.80
Add to cart
Upgraded Creality Hand Twist Leveling Nuts, 1M Capricorn XS Bowden Tubing, Tube Cutter, Hot Bed Die Springs and M4X35 Screws for Ender 3/3 Pro, Ender 5/5 Plus, CR-10, CR10S/10S Pro, CR 20 3D Printer
- 4*Upgraded Aluminum Hand Twist Level Nut. These red aluminum nuts are original upgraded replacement part for Ender 3/3 Pro/3 V2, Ender 5/5 Plus/ 5 Pro, CR-10, CR-10 V2, CR-10 Max, CR 10, CR-10 Mini, CR-10S, CR 10S Pro,CR-10 Plus, CR-X, CR 20.
- 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills.
- 4* Hot bed Die Spring. NOTE: The springs are around 25mm long, which is longer than ender 3, ender 3 pro and ender 3 v2 printer springs. If you really like this product, you can use a tool to cut it to be shorter or adjust the hot bed to be higher to fit the springs.
$33.59
Add to cart